ARMIX CCTV® 2016 - All Rights Reserved  
NETWORK VIDEO RECORDERS - NX2 SERIES NVR

Storage Space

The NX Series NVRs can utiliize up to 8TB per drive using premier 24/7 security hard drives.  Security hard drives are designed to be in use continuously unlike consumer hard drives that are typically designed to be used about 4-8 hours per day.  Security hard drives are also optimized to stream video and have improved MTBF ratings. The NX2-16 can hold up to 4 hard drives for a maximum of 32TB of internal storage
8 8

Pro-16 NVR

 NX2 Series

The NX2 Series NVR brings simplicity to the world of IP by utilizing an autoconfiguration technology that allows this NVR to connect to Armix I-series IP cameras without any input from the installer.   Connect the Armix IP camera to the POE port on the back of the unit, wait 2 minutes, and you are done connecting your camera - it’s that easy.  Once the cameras are connected, you can enter the user-friendly system menu to setup recording schedules, change the resolution or frame rate of your cameras, change the network settings, or many other possible features depending on your particular installation.  Don’t want to deal with all of this? No problem, just go to the menu and setup continuous recording for one camera then use the built in copy function to apply it to the rest. 

Stay Connected

We have apps for smart phones and tablets for either Apple    or Android  devices.  Want to see your cameras on the go?  Just setup your NVR using your external IP address or using the built-in DDNS program and port forward ports 8000 & 554 in your router (or change it to different ports if needed).  You can also port foward port 80 to allow remote connection to your NVR from a web browser or our CMS software. If you need help we are here to assist you in a successful install.
Downloads
Instruction Manual
NX2-16 Spec Sheet
ARMIX CCTV® 2016 - All Rights Reserved  
Number Of Channels Signal Format Resolution Main Monitor Resolution Max. Sub Monitor Resolution Max. Max Per Drive Capacity Max Internal Bays Max Total Capacity Front Rear User Interface NIC Interfaces Speed NIC Interfaces Speed Temperature Range Weight Without HDDs Rack Space 1.5U NX2-16 16 160mbps 4 32TB 11 lbs Dimensions Operational Data Power 100-240VAC 6.3A Max 14°F to 120°F 17.5" x 15.4" x 2.75" Physical Data Yes Yes (Requires Internet) Yes Yes (Requires Internet) Yes Android and iOS IE, Firefox, & Safari CMS Software CMS Software Additional  Features Digital Zoom Automatic DST  SMART HDD Email Notification Multi-Language 16 10/100 Yes Network Access Smart Phone Apps Tablet Apps Webviewer PC Client MAC Client Android and iOS Input Methods Front Panel, Mouse, Remote, Network Interface RJ45 POE RJ45 Network DDNS 1 10/100/1000 Storage USB 2 1 8TB HDD Backup Media Format Huge Backup USB Drive, Network *.MP4, Proprietary Format Max: up to 10080 Minutes Playback Playback Speed Synchronous Playback Search 16 Channels @ 1080p x0.25, x0.5, x2, x4, x8, x16, x32, x64, x128 Instant, Date/Time, Event Recording H.264, H.265, MPEG4 VGA, 1MP, 1.3MP, 2MP, 3MP, 4MP, 5MP, 6MP, 8MP, 12MP Continuous, Motion, Sensor, Schedule Max 30 Seconds Max 10 Minutes Compression IP Resolution Max Bit Rate Recording Modes Motion Pre-Recording Motion Post-Recording Output Video 4096x2160p 1920x1080p Input up to 12MP 1/1 G.711 ulaw Alarm Input Output 16 4 Audio Recorded Audio Camera Dependant IP HDMI   VGA  Input & Output Audio Codec Supported Specifications

Ultra High Definition HDMI Output

                  The NX2-Series NVRs has a the capability to output HDMI signals at 4K UHD signal allowing                 your customer to view their cameras in detail that cannot be seen on 1080p.  This output also                 eliminates live view downscaling of IP cameras the exceed 2MP. 
ARMIX CCTV® 2016 - All Rights Reserved
NETWORK VIDEO RECORDERS - NX2 SERIES NVR
NVR Available in 16 Channels Integrated POE Ports HDMI & VGA Outputs
Downloads
Instruction Manual
NX2-16 Spec Sheet

Pro-16 NVR

 NX2 Series

The NX Series NVR brings simplicity to the world of IP by utilizing an autoconfiguration technology that allows this NVR to connect to Armix I- series IP cameras without any input from the installer.   Connect the Armix IP camera to the POE port on the back of the unit, wait 2 minutes, and you are done connecting your camera - it’s that easy.  Once the cameras are connected, you can enter the user-friendly system menu to setup recording schedules, change the resolution or frame rate of your cameras, change the network settings, or many other possible features depending on your particular installation.  Don’t want to deal with all of this? No problem, just go to the menu and setup continuous recording for one camera then use the built in copy function to apply it to the rest.

Storage Space

The NX Series NVRs can utiliize up to 8TB per drive using premier 24/7 security hard drives.

Stay Connected

We have apps for smart phones and tablets for either Apple or Android devices.  Want to see your cameras on the go?  Just setup your NVR using your external IP address or using the built-in DDNS program and port forward ports 8000 & 554 in your router (or change it to different ports if needed).  You can also port foward port 80 to allow remote connection to your NVR from a web browser or our CMS software. If you need help we are here to assist you in a successful install.
ARMIX CCTV® 2016 - All Rights Reserved  
ARMIX CCTV® 2018 - All Rights Reserved